FAQ

The process to open up most headlights is the same, here is how we do it at the shop.

PREHEAT (very important to preheat) your oven to around 150 degrees F. While it is preheating, remove the screws on the backside of the headlight which also hold the lens to the housing. Once oven is preheated, place one headlight in the oven for ten to fifteen minutes. Remove headlight, then you can use a couple flathead screwdrivers to carefully pry the clear lens off.

BE SURE not to touch the inside of the lens or the chrome housings as they will be perfectly clean. This will prevent you from have to clean or polish them later. Remove the inside bezel and swap out the amber lenses for the clear, in most cases they will need epoxied in.

Replace the amber reflectors with your Klearz lenses. Making sure to epoxy each tab to secure them in place. 

Reassemble the headlight, place in oven for another 5-10 minutes on low heat, then reinstall the screws. This should seal up your headlight for you, but I like to supplement with a nice bead of clear silicone all around the outside as well as a backup.

These are just generic instructions but it should be helpful for most headlights. If your not comfortable opening your headlights yourself, we can recommend a few retrofit shops to do the work for you.

LiveZilla Live Chat Software